
90
EuroPak-15ab Receiver User Manual Rev 1
Chapter 6
Data Logs
6.3.8
RXCOMMANDS
Receiver Configuration
This log outputs all of the current receiver configuration parameters set using the commands in
Chapter 5
.
When requested, one RXCOMMANDS log is output for each command type. The embedded message is the
most-recent command string entered by you for that command type. If you have not yet entered a command
string for that command type, the default configuration values from start-up are provided.
Log Type: Polled
Message ID: 579
Recommended Input:
LOG RXCOMMANDSA ONCE
Example Output:
#RXCOMMANDSA,COM1,44,80.0,FINE,439,232702.670,00A41000,0000,33331;
4,COM COM1 230400 N 8 1 N OFF ON*0AEE4B3F
#RXCOMMANDSA,COM1,43,80.0,FINE,439,232702.672,00A41000,0000,33331;
20,CHANCONFIG24GALILEO8GPS*21083552
#RXCOMMANDSA,COM1,42,80.0,FINE,439,232702.674,00A41000,0000,33331;
5,ECUTOFF 10.0*F1DBFE25
#RXCOMMANDSA,COM1,41,80.0,FINE,439,232702.675,00A41000,0000,33331;
7,FIX NONE*D28AC210
#RXCOMMANDSA,COM1,40,80.0,FINE,439,232702.675,00A41000,0000,33331;
21,PULSEBLANKING L1 127*D372D5DC
#RXCOMMANDSA,COM1,39,80.0,FINE,439,232702.679,00A41000,0000,33331;
21,PULSEBLANKING L5 127*4D256AE3
#RXCOMMANDSA,COM1,38,80.0,FINE,439,232702.680,00A41000,0000,33331;
21,PULSEBLANKING E5B 127*B567DC0E
#RXCOMMANDSA,COM1,37,80.0,FINE,439,232702.680,00A41000,0000,33331;
39,DLLORDER GPS 1*597D0670
#RXCOMMANDSA,COM1,36,80.0,FINE,439,232702.682,00A41000,0000,33331;
2,ANTENNAPOWER ON*7977E4D8
#RXCOMMANDSA,COM1,35,80.0,FINE,439,232702.682,00A41000,0000,33331;
3,CLOCKADJUSTDISABLE*0169268B
#RXCOMMANDSA,COM1,34,80.0,FINE,439,232702.685,00A41000,0000,33331;
4,COM COM3 115200 N 8 1 N OFF ON*10FD1D32
#RXCOMMANDSA,COM1,33,80.0,FINE,439,232702.687,00A41000,0000,33331;
47,POSITIONTYPE GPSL1*5A4C0818
#RXCOMMANDSA,COM1,32,80.0,FINE,439,232702.688,00A41000,0000,33331;
45,SDLLBW 0 0.2000*3D836CFF
Field
Field Name
Data Description
Format
Bytes
Offset
1
header
This field contains the message header, in
ASCII
or
Binary
format.
See
Section 4.3
on
Page 38
.
H
0
2
command
type
Indicates which command the embedded message
represents, see
Table 42
on
Page 92
.
Int
4
H
3
e msg
Embedded message of the most-recent command
string you entered. If a command string has not been
entered yet, the default values from start-up will be
provided.
Uchar
[variable]
variable
H+4
4
32-bit CRC (
ASCII
and
Binary
only)
Hex
4
variable