
30
EuroPak-15ab Receiver User Manual Rev 1
Chapter 2
Installation
measurements.
•
Pulse Per Second Output (PPS)
A pulse for which the falling edge is synchronized with GPS
time.
•
Position Valid Output (PV)
High when good GPS position and time solution.
•
Error Output (ERROR)
High when a receiver hardware failure is detected.
See
Appendix A, Technical Specifications
starting on
Page 112,
for further information on the strobe signal
characteristics.
Table 2: Available Strobe Signals on the EuroPak-15ab
The ground return pin for these signals is Pin 9.
2.3.2
Status Indicators
The EuroPak-15ab receivers have LED indicators that provide the status of the receiver. The EuroPak-15ab
provides the status indicators shown in
Table 3
.
Table 3: EuroPak-15ab Status Indicators
2.3.3
Mounting Bracket
Along with the EuroPak-15ab
enclosure, mounting kits have been provided to facilitate mounting the receivers
to a surface. To install the mounting bracket provided with the EuroPak-15ab, refer to the instructions provided
with the mounting kit.
Page 121
provides the dimension information for the bracket.
The mounting kits are not designed for use in high-dynamics/vibration environments. Contact NovAtel,
see
Page 17
, if your application requires the EuroPak-15ab
to be mounted in these types of environments.
Signal
EVENT1
MSR
PPS
PV
ERROR
STATUS
_RED
STATUS
_GREEN
EuroPak-15ab
I/O port,
pin 4
I/O port,
pin 3
I/O port,
pin 2
I/O port,
pin 5
I/O port,
pin 8
Not
available
Not
available
Indicator
Indicator Color
Status
COM1
Green
Data is being transmitted from COM1
Red
Data is being received on COM1
COM2
Green
Data is being transmitted from COM3
Red
Data is being received on COM3
PWR
Red
The receiver is powered