
46
EuroPak-15ab Receiver User Manual Rev 1
Chapter 5
Commands
5.1
Functional Listing of Commands
Table 13
lists the commands by function. Please see
Section 5.3
on
Page 48
for a more detailed description of
each individual command.
Table 13: Commands By Function
Command
Description
COMMUNICATIONS, CONTROL AND STATUS
ANTENNAPOWER
Control power to low-noise amplifier (LNA) of an active antenna
COM
Set serial port configuration
LOG
Request a log
UNLOG
Remove a specified log from logging control
UNLOGALL
Remove all logs from logging control
GENERAL RECEIVER CONTROL
AGCMODE
Control Automatic Gain Control (AGC) functionality
RESET
Perform a hardware reset
FRESET
Reset receiver to factory default
POSITION CONTROL
FIX
Constrain receiver position
POSITIONTYPE
Control the position solution on GPS L1 or L5 signals
SATELLITE TRACKING AND CHANNEL CONTROL
ASSIGN
Assign individual satellite channel
CHANCONFIG
Set receiver channel tracking configuration
ECUTOFF
Set satellite elevation cut-off angle
PULSEBLANKING
Enable/disable digital pulse blanking for L1 Galileo or E5a/E5b signals
SDLLBW
Configure channel’s DLL filter bandwidth
SPLLBW
Configure channel’s phase-lock-loop bandwidths
STHRESHOLD
Control signal channel thresholds for acquisition, tracking and cross correlation
CLOCK INFORMATION, STATUS, AND TIME
EXTERNALCLOCK
Set the parameters for an external clock