Novatech Bitronics M87X Series, Руководство пользователя

Страница: 98 / 184

ML0021 August 15, 2018
82
Copyright 2018 Bitronics, LLC
notifications will be sent out each port configured for notifications.
5.10.4 Error Recovery
There is no provision to confirm that a message has been successfully transmitted to an
end user or device. There may be a busy signal, an answering machine may take the call,
or another device may be using the phone line.
5.10.5 Example
Here is an example of a string that can be configured to send the numeric message 123 to
a pager with the phone # 610-555-1212, and then hang up:
ATDT6105551212,,,,,,,,,123,,,,ATH<cr>
Note that it is typically important to enter the <cr> (carriage return character) for the string
to be properly recognized by the modem. Information on modem control characters is
available from your modem manufacturer.
5.10.6 Control Characters
Control characters can be entered in the Configurator by typing “\x” followed by the
hexadecimal representation of the ASCII code for the desired character. For example, the
control-Z character is represented by a hexadecimal 1A; therefore, “\x1a” should be
entered into the serial data string where a control-Z is desired.
If the characters “\x” are desired to appear in the serial data string rather than a control
character, then this special sequence can be escaped by entering “\\x”. The characters “\x”
will appear in the serial data string.