Novatech Bitronics M87X Series, Руководство пользователя

Страница: 27 / 184

ML0021 August 15, 2018
11
Copyright 2018 Bitronics, LLC
CSA C22.2 NO. 61010-2-030-12-CAN/CSA, Edition 1, Issue Date 2012/05/01,
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR
MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-030:
PARTICULAR REQUIREMENTS FOR TESTING AND MEASURING CIRCUITS.
If applicable, the CE mark must be prominently marked on the case label
.

Units manufactured with the following options are not CE marked:
S1C and S2C options, P33 digital output option.

Ethernet modules P10, P11, P12 and Host module H11 are not RoHS
compliant. These modules are no longer offered in newly manufactured CE
marked units but may be available for purposes of repair and replacement.
European Community Directive on EMC (EMCD) 2014/30/EU, superseding
Directive 2004/108/EC (which replaced former directive 89/336/EEC amended by
92/31/EEC, 93/68/EEC, 98/13/EC) and Directive 91/263/EC [TTE/SES]).
European Community Directive on Low Voltage (LVD) 2014/35/EU, superseding
2006/95/EC, (which replaced former Directive 73/23/EEC).
European Community Directive on the restriction of the use of hazardous
substances in electrical and electronic equipment (RoHS “recast”), 2011/65/EU.
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
2014/30/EU
- EMCD Directive (from April 20th, 2016), superceding 2004/108/EC (withdrawn April 19th, 2016),
2014/35/EU
- LVD Directive (from April 20 th , 2016), superceding 2006/95/EC (withdrawn April 19 th , 2016),
2011/65/EU
- RoHS (“recast”) Directive of the European Parliament and of the Council of 8 June 2011.
Product and Generic Standards
The following product and generic standards were used to establish conformity:
Low Voltage (Product Safety):
IEC/EN 61010-1, Edition 3, Issue Date 2010
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory
Use – Part 1: General Requirements
IEC/EN 61010-2-30, Edition 1 – Issue Date 2010
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory
Use – Part 2-030: Particular Requirements for Testing and Measuring Circuits
EMC:
EN 61326-1: 2013 (supersedes EN 61326-1: 2006),
IEC/EN 60255-26: 2013 + AC: 2013 (product standard used in part – reliance on basic
EMC standards) (supercedes IEC 60255-25: 2000 and IEC 60255-26: 2008, which
superceded EN 60255-26: 2006, which superceded EN50263: 2000) EN 61000-6-2: 2005
+ AC: 2005 (supercedes EN 61000-6-2: 2005, which superceded EN 50082-2: 1995),
EN 61000-6-4: 2007 +
A1: 2011 (IEC date 2010), (which superceded EN 50081-2: 1993).
Radiated Emissions Electric Field Strength
Basic EMC emissions standard (radiated emissions):
EN 55011: 2016, EN 55011: 2009 + A1: 2010,
(
which superceded EN 55011: 2007 + A2:
2007, which superceded EN 55011: 1998 + A1:1998 + A2:2002)