manualshive.com logo in svg

Novatech Bitronics M87X Series, Руководство пользователя

Поделиться
Скачать
Novatech Bitronics M87X Series Скачать руководство пользователя страница 97

 

 

 

ML0021                        August 15, 2018 

81

   

               Copyright 2018 Bitronics, LLC 

5.9  Using the M87x with a Bitronics Analog Output Converter 

 
The M87x may be used with any of the Bitronics AOC units (NAO8101, NAO8102, 
NAO8103, or NAO8104).  The AOC may be connected to any of the three Host Serial 
Ports P2, P3, or P4 (Section 3.1.1).  The serial port must be configured for the appropriate 
protocol and register set for the AOC that will be connected.  Setting up the serial ports is 
accomplished by using the M87x Configurator.  AOC units will only function with the M871 
configured for the Bitronics Legacy register set.  When using AOCs that communicate via 
Modbus (NAO8101 and NAO8103) the M87x COM port must be set for an RxD to TxD 
Delay of 10ms for proper operation.  A separate AOC may be connected on each serial 
port.  Serial port and connection information is shown in Figures 3 and 4 (pg. 22-24).  As 
stated previously, the AOC address must match the protocol address assigned to the 
M87x communications port. 
 

Protocol 

Baud 

Parity 

Media 

DNP 

9600 

NONE

RS485

Modbus 

9600 

EVEN

RS485

 

5.10  Automatic Event Notification 

 
The 70 Series is capable of sending an Automatic Notification via email, or over a serial 
port.  The action of automatic notification may be selected in response to any of the 
available triggers, similar to triggering a recording or activating an output contact.  The type 
of notification (email or serial) is selected in the “Automatic Notification settings" page of 
the Configurator. 

 
5.10.1  Email Notifications 

 

A valid SMTP (email) server IP address must be entered.  This server must exist on the 
local network in order for emails to be sent.  Email addresses can then be entered for up to 
3 users. 
 

5.10.2  Serial Notifications 

 

The 70 Series can be configured to send text strings out a serial port P2 or P3.  These text 
strings can be used for various purposes, including operating a modem.  This could be 
used to send a page to a numeric pager, for example.

   

 

5.10.3  Data Sent 

 

The 70 Series meter will send the user-configured string out the specified COM port.  It is 
the user’s responsibility to ensure the string is properly formatted to communicate through 
any port switches, modem switches, and/or modems.  The user is also responsible for 
ensuring the string specified is meaningful to the user or device that will be receiving it. 

 

If the 70 Series meter is not configured to have a COM port send notifications, then no 
serial notifications will be sent.   

 

If the 70 Series meter has multiple COM ports configured to send notifications, then the 

Содержание Bitronics M87X Series

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды