manualshive.com logo in svg

Novatech Bitronics M87X Series, Руководство пользователя

Поделиться
Скачать
Novatech Bitronics M87X Series Скачать руководство пользователя страница 79

 

 

 

ML0021                        August 15, 2018 

63

   

               Copyright 2018 Bitronics, LLC 

Retriever software programs.  These are user-selectable binary or ASCII format files.  The 
files are stored as compressed .zip files to increase storage and decrease user download 
times.  These files may be retrieved and deleted from the instrument using the available 
communications protocols.  Please refer to the specific protocol manual or section 5.5 
(Zmodem and FTP) for details.  A file cannot be deleted while being read by another 
device.   
 
The Waveform Recorder file "

WR1_nnnn.CFG

" or "

WR2_nnnn.CFG

" will contain the 

event parameters including the names of the channels, time of start of file, time of trigger, 
and sampling frequency for each cycle.  The file "

WR1_nnnn.DAT

” or "

WR2_nnnn.DAT

" 

contains the time of each sample and the data.  The data values are integers and can be 
scaled back to primary units using the scale factors in the .CFG file.  The file name format, 

"WR1_nnnn.CFG"

 and 

"WR1_nnnn.DAT,”

 indexes automatically from 

"WR1_0001.xxx"

 

to 

"WR1_9999.xxx"

.  Similarly, Waveform Recorder 2 files will be stored as 

"

WR2_nnnn.CFG

" and "

WR2_nnnn.DAT

".

   

 
Upon power-up (or re-boot), the M87x notes the highest index number in memory, and will 
increment by one for the next file.  If there are no waveform records, the next one will be 
WR1_0001.  If there is a WR1_0034 in memory upon re-boot, the next file will be 
WR1_0035.  Note that if the stored files are deleted, but the M87x is not re-booted, it will 
continue to index in sequence as if the files were still there. 
 
The Disturbance Recorder stores files in the same manner as the Waveform Recorder.  
Files from Disturbance Recorder 1 will be saved as "

DR1_nnnn.CFG

" and 

"

DR1_nnnn.DAT

,” with the same indexing sequence as the waveform files.  Similarly, 

Disturbance Recorder 2 files will be stored as "

DR2_nnnn.CFG

" and "

DR2_nnnn.DAT

". 

 
The Trending file "

TR1.CFG

" will contain the event parameters, including the names of the 

channels, time of start of file, and trend interval for each measurement.  The file 
"

TR1.DAT

" contains the time of each sample and the data.  The data values are integers 

and can be scaled back to primary units using the scale factors in the .CFG file.  
 

5.4.4a Comtrade ZIP Files 

 
The .CFG and .DAT files are combined into a single .ZIP file, which is placed in the 
c:\DATA\ or e:\DATA directory (see section 5.5).  This file may be retrieved using FTP, 
Zmodem, or protocol specific file transfer methods.  Note that the .ZIP file may take up to 1 
minute to appear in the c:\DATA\ directory after the records are created. 
 

5.4.5 IEEE Long File Naming Convention 
 

The 70 Series IEDs are capable of creating record files that meet the IEEE C37.232-2007 
standard for file names.   The long filename feature is enabled and configured on the 
Identity Page of the 70 Series Configurator.  The Identity Page is shown below with factory 
default values. Settings relevant to long filename configuration are highlighted in green. 
 

Содержание Bitronics M87X Series

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды