Novatech Instruments 1450A/02-AH Скачать руководство пользователя страница 10

1450A/02-AH Manual

10/10

Copyright 2003 Novatech Instruments, Inc.

10/5/2005

WARRANTY

NOVATECH INSTRUMENTS, INC. warrants that all instruments it manufactures are free from
defects in material and workmanship and agrees to replace or repair any instrument found defective
during a period of one year from date of shipment to original purchaser.

This warranty is limited to replacing or repairing defective instruments that have been returned by
purchaser, at the purchaser's expense, to NOVATECH INSTRUMENTS, INC. and that have not been
subjected to misuse, neglect, improper installation, repair alteration or accident. NOVATECH
INSTRUMENTS, INC. shall have the sole right to final determination regarding the existence and
cause of a defect.

This warranty is in lieu of any other warranty, either expressed or implied, including but not limited to
any warranty of merchantability or fitness for a particular purpose. In no event shall seller be liable
for collateral or consequential damages. Some states do not allow limitations or exclusion of
consequential damages so this limitation may not apply to you.

All instruments manufactured by NOVATECH INSTRUMENTS, INC. should be inspected as soon
as they are received by the purchaser. If an instrument is damaged in shipment the purchaser should
immediately file a claim with the transportation company. Any instrument returned to NOVATECH
INSTRUMENTS, INC. should be shipped in its original shipping container or other rigid container
and supported with adequate shock absorbing material.

This warranty constitutes the full understanding between NOVATECH INSTRUMENTS, INC. and
the purchaser and no agreement extending or modifying it will be binding on NOVATECH
INSTRUMENTS, INC. unless made in writing and signed by an authorized official of NOVATECH
INSTRUMENTS, INC.

NOVATECH INSTRUMENTS, INC.

P.O. Box 55997

Seattle, Washington 98155-0997

United States of America

FAX: 206.363.4367

TEL: 206.301.8986

http://www.novatech-instr.com

[email protected]

Copyright 2003, 2004 Novatech Instruments, Inc.

Содержание 1450A/02-AH











Отзывы: