Instruction Manual ND IM 3 JAN 2017
Instruction Manual
IM ND 3 JAN 2017
Page 15
6 USING THE 7 DAY TIMER OPTION:
The 7-Day Timer option allows the NovaDrier™ to be programmed so it automatically will turn on
(and/or off) at preset times. Refer to the instructions below and the separate timer instruction manual
for more details of timer operation.
Before Setting the Timer:
Assure that compressed air is supplied to the dryer, turn
the dryer ON and set the drying temperature on both
temperature controls.
Setting the Timer:
1- Press Menu
2- Press +/- for 24 hour or AM/PM mode. Press OK.
3- Set correct hour of day with +/- & press OK
4- Set correct minutes with +/- & press OK
5- Set day of week with +/- & press OK
6- Prog 01 appears – Press OK
7- Press +/- to choose hour of day for “ON”. Press OK
8- Press +/- to choose minutes of “ON” hour. Press
OK
9- Use +/- to choose Mon-Sun, Mon-Sat., Mon-Friday,
Sat/Sun, or single day. Press OK.
10- Prog 02 appears – Press OK and choose schedule
for “OFF” in same manner. Press OK.
Your 7-day timer is now set.
When the Timer Turns the Dryer On:
1) A solenoid valve automatically opens, allowing compressed air to enter the drying hopper.
2) The dryer's heaters and control circuit are automatically activated.
3) The NovaDrier operates normally, at the set point you preselected, until the timer or an
operator turns it off.
When the Timer Turns the Dryer Off:
1) The NovaDrier heaters and control circuit are automatically turned off immediately.
2) After a 5 minute delay to cool the heaters, the compressed air solenoid valve closes,
shutting off the air LOWER to the dryer.
Grasslin 7-Day Timer # FM1D20E-24V
NOVATEC P/N 13777
