VX16s All-in-One Controller
User Manual
www.novastar.tech
25
the video source is 3840×1080@60Hz, set the right eye start to 1920. In conclusion, it is recommended
you set the right eye start to the half of the video source width.
For a top-and-bottom 3D video source
If the resolution of the video source is 1920×1080@60Hz, set the right eye start to 540. If the resolution of
the video source is 3840×1080@60Hz, set the right eye start to 540. In conclusion, it is recommended you
set the right eye start to the half of the video source height.
For a frame-sequential 3D video source, you do not need to adjust this parameter.
Step 8 Adjust the signal delay to keep the left-right eye switching of the 3D glasses and the LED screen in sync. It is
recommended you adjust the signal delay according to the actual visual effect after the 3D mode is turned on.
Step 9 Turn on the synchronization function and select the current 3D video source as the synchronization source.
Step 10 Turn on the 3D mode and wear your 3D glasses to enjoy the 3D effect.
A.3 Notes
1. Turning on the 3D mode halves the loading capacity of each Ethernet port and the VX16s unit.
2. It is recommended you stay at most 3 meters away from the EMT200 when using the 3D glasses.
3. The frame rate of the selected 3D video source should be higher than 60 Hz.
XI'AN
NOVASTAR
TECH
CO.,LTD.
