VX16s All-in-One Controller
User Manual
www.novastar.tech
20
5.8.3 FN
The
FN
button on the front panel can be customized as a shortcut for the
Synchronization
(default),
Freeze
,
FTB
,
Quick Configuration
or
Color
function.
5.8.4 Advanced Functions
Advanced functions include 3D mode and self-test settings.
5.8.4.1 3D Mode
The VX16s can work with the EMT200 3D emitter and 3D glasses to provide you with 3D visual experience.
Notes
Turning on 3D mode halves the device output capacity.
To enable pixel-to-pixel display of a 3D video source, set the layer width to the half of the resolution width
of the 3D source if the source is side-by-side, or set the layer height to the half of the resolution height of
the 3D source if the source is top-and-bottom.
Figure 5-19 Hardware connections
Step 1 Complete the hardware connections as shown in
Step 2 Rotate the knob to choose
Advanced Functions
>
3D Mode
>
Status
to turn on the function.
Step 3 Select the 3D format of the video source. The options include
Side-by-Side
,
Top-and-Bottom
and
Frame
Sequential
.
Step 4 Set the eye priority according to the mode of the 3D glasses. The options include
Left
and
Right
.
Step 5 Select
More Settings
to complete the following settings.
Right Eye Start
Signal Delay Time
Third-Party Transmitter
For more detailed operating procedure of the 3D function, see
A Instructions for the 3D Function
5.8.4.2 Self-Test
When the VX16s fails, you can test it yourself and send the test result to NovaStar.
XI'AN
NOVASTAR
TECH
CO.,LTD.
