NovaScale Blade 2021 Series, Инструкция по установке и эксплуатации

Страница: 36 / 98

18
NovaScale Blade 2021 Installation and User’s Guide
See “Diagnosing problems using Light Path Diagnostics” on page 67 for information on what
action to take if there is a component error.
Table 3. SW4 Light Path Diagnostics LED locations
LED error Action
NMI Check the error log for additional information. Reboot the
NovaScale Blade Server. If the error still exists, replace the
system board.
MIS Check the processors to make sure they are at the same
speed.
SBRD Reboot the NovaScale Blade Server. If the error still exists,
replace the system board.
TEMP Check the NovaScale Blade Chassis unit blowers and air
inlets. Check the room temperature.
Light Path Diagnostics LED Check the Light Path Diagnostics LED for errors
Light Path Diagnostics button (SW4) Press SW4 to locate faults on the system board. If the
processor or memory LED is lit, reseat the component. If the
LED remains lit, replace the defective component.