Novanta Jadak HS-1RS, Руководство пользователя

Страница: 20 / 102

HS-1RS User Guide
Page 20
Trigger Commands
To scan barcodes, you need to ‘trigger’ the HS-1RS. This can be done in various ways. You
can activate the HS-1RS by sending the trigger command TRGON serially or by pressing the
trigger button on the scanner itself.
Several supporting commands are provided to set the allowed trigger time-out (e.g.,
the maximum time that the scanner will take to keep looking for a barcode.)
TRGON This command turns the trigger ON.
TRGOFF This command turns the trigger OFF.
Trigger Modes
Manual Trigger (level)
You can activate the imager by pressing the trigger or sending the serial trigger command
TRGON . When in manual trigger mode, the HS-1RS scans until a bar code is read, until
the trigger is released, a TRGOFF command is sent, or a time-out occurs.
Use the command below to enable Manual Trigger Mode.
* Manual (level) Trigger
Presentation Mode
Presentation mode is a hands-free mode of operation in which the imager will
automatically trigger on when an object is moved into the field of view.
The HS-1RS will not enter low power mode while in Presentation Mode.
Use the command below to enable Presentation Mode.
Presentation Mode