Novanta Fiber Tiger, Руководство пользователя

Страница: 47 / 62

41
FIBER_TIGER_manual, 2021-11-29
TIP
Use each lens cleaning paper only once.
6. Cleaning, maintaining and repairing 6.3. Cleaning the protective window
5. If the protective window is heavily contaminated then wipe the surface of under very
light pressure with lens cleaning paper that is soaked with Isopropanol.
6. Cover the surface, that is to be cleaned, with 1 layer of lens cleaning paper. Do not
fold the paper.
7. Sparingly drop Isopropanol on the whole surface until it is covered just right. The
lens cleaning paper may not float on the Isopropanol on no account.
8. Pull the lens cleaning paper slowly and with constant velocity to the side in a way
that no liquid remains at the tear-off edge.
9. Check if the protective window is clean. To do so illuminate it with a bright light
source and examine it in front of a dark background.
The surface has to be undamaged, clean and free of streaks.
10. If the surface is damaged then replace the protective window.
11. If the surface is still contaminated then clean the protective window with an new lens
cleaning paper and Isopropanol as described above (put on lens cleaning paper, wet
the surface and pull the lens cleaning paper to the side). If necessary repeat this step
once.
12. If the surface is still contaminated then clean the protective window with a new lens
cleaning paper and Acetone as described above (put on lens cleaning paper, wet the
surface and pull the lens cleaning paper to the side).
13. If the surface is still contaminated then replace the protective window.
14. Carefully press the clean protective window back into the socket.
15. Attach the protective window bayonet socket to the scan head and turn it clockwise
until it locks.