Novametrix Medical Systems OXYPLETH 520A, Руководство по обслуживанию

Страница: 78 / 133

Section 15
Connecting to other Equipment
68
Model 520A Service Manual 5693-90-01
PRELIMINARY
2. Connect the printer interface cable, PN:4913-00, to the RS232C connector
1
on the Model 520A. Connect the other end of the cable to the Model 315.
3. Connect the printer’s AC adapter (if desired).
4. Turn the printer on first , then turn the Model 520A on.
5. Select
315
from the
Ser.
(Serial) portion of the Model 520A Options Menu.
6. Refer to the Model 315 documentation for further printer details.
Connecting Seiko DPU-411 Thermal Printer
15.4
To connect the SIEKO Model DPU-411 Thermal Printer to the Model 520A:
1. Set the DIP switches located on the bottom of the DPU-411.
First bank of eight switches; 1,2 down (off), 3,4 up (on), 5,6 down (off), 7,8
up (on).
Second bank of six switches; 1-3 up (on), 4-6 down (off).
Figure 14. Connecting the Model 315 Printer
Figure 15. Configuration of Seiko Thermal Printer.
MODEL 315 REAR PANEL
POWER SWITCH
AC ADAPTER
4913-00 CABLE
MODEL 520A REAR PANEL
RS232-C INTERFACE
CONNECTOR
DIP SWITCHES
1 2 3 4 5 6 7 8
Seiko DPU-411 bottom view