Novametrix Medical Systems OXYPLETH 520A, Руководство по обслуживанию

Страница: 17 / 133

5-Jun-01 Model 520A Service Manual
7
PRELIMINARY
6
Rear & Top Panels
Figure 2. Rear and Top Panel Descriptions
1 2 3 4 5 6 7
10
9
11
8
1. Line Cord Clip; This clip can be
set around the line cord strain
relief so that the cord cannot be
pulled out of the connector.
2. Line Cord Connector; The AC
(Mains) line cord attaches to the
monitor here.
3. Fuse Compartment; The AC
(Mains) line fuse(s) are inside this
compartment. Pry open with
small screwdriver.
4. AC Mains Voltage; The currently
selected AC Mains input voltage
is identified here.
5. AC Mains Power Switch; With
switch in “O” position, AC Mains
voltage does not enter monitor.
With switch in “|” position, AC
Mains voltage allowed into
monitor to power unit and/or
charge internal battery.
6. Rear Feet; Rubber tipped rear feet
(2).
7. Serial Output Connector;
Serial (RS232) data output here
for use with Tele-Sat™ telemetry
system, optional analog output
module, and other RS232
interfaces. A female 25-
pin “D” connector serves as the
interface connector.
8. Top Cover
9. Carrying Handle; Monitor
carrying handle molded into case.
10. Warning Label; Explosion and
electrical shock warnings.
11. Patient Isolation Label; The
Model 520A is Type BF
equipment.