NovaLynx Corporation________________________________________________________________________________
200-WS-21-A
Page 5
November 2018
200-WS-21-A Dual Set Point Controller Specification
Display
LCD, 2x16 characters, 3x8 mm character size, backlit
Indicators
Power: Green LED, Alarms: Red LEDs
Setup
DIP switch: WIND/TEMP, MPH/KPH, DEG F/DEG C, BUZZER/DISABLE
Programming
Pushbutton: MENU, UP, DOWN, CLEAR, GO
Connections
All user connections 1/4" male spade terminals (connectors supplied)
Relay specifications
Form "C" (SPDT) N.O. and N.C. Contact rating: 3A @ 24Vdc / 115 VAC
Alarm ON / OFF delay range
0 to 99 seconds
Timing accuracy
± 2%
Measurement range
0 to 99.9
Integration interval
2 seconds
Input Power
Nominal 12V AC or DC, 50 mA maximum
Operating temperature
-20°C to +50°C
Mounting
Knock-outs in back surface for screw mounting to a panel
Dimensions
5.12 x 6.25 x 2.95 inch (13.0 x 15.9 x 7.5 cm)
Weight / Shipping
1 lbs (0.45 kg) / 2 lbs (0.9 kg)
200-WS-01B Anemometer Specification
Measurement Range
125 mph max (55.88 m/s max)
Speed Threshold
1.2 mph (0.5364 m/s)
Speed Constant
1.25 mph = 1 Hz (0.5588 m/s = 1 Hz)
Accuracy
1 mph (0.4470 m/s) or ±3%
Transducer Type
Reed switch, magnet activated
Maximum Rating
10 mA @ 50 V (ac or dc)
Turning Radius
4 inch (10.16 cm)
Cable
40 feet (12 m), 2 conductor, 24 AWG, shielded, spade plug connectors
Mounting
1.07 inch diameter by 0.82 inch socket (27 mm dia x 21 mm)
(fits standard 3/4" IPS pipe)
Dimensions
4.5 H x 8.5 W inches (12 x 22 cm)
Weight / Shipping
1 lbs (0.45 kg) / 2 lbs (0.9 kg)
4
PRE-INSTALLATION CHECKOUT
The controller can be operated before installation to become familiar with the menus and programming
features. You will need a power supply and the Wind Alarm controller. The sensor and relays will not be
connected for these tests.
