NOVACARE 960800, Инструкция по эксплуатации

Страница: 13 / 40

13
Before installation, deinstallation or troubleshooting:
• Stop the hoist motor by pressing the EMERGENCY OFF button
• Switch off the power supply and unplug the mains power cable.
• Release any load from the hoist motor and lifting column
9. Safety in use/Warnings and
safety notes
Before first use:
• Install the hoist only in accordance with the instructions for use.
• The individual elements (hoist motor, lifting column, manual controller etc.) must all be
linked together before the control unit is connected to the mains.
• Ensure that the mains voltage is correct for the product or system before connecting it.
• Connect the charger to the correct power supply (socket).
• Ensure that the hoist can be freely moved and there are no obstacles in the way.
• Check that it functions correctly after assembly.
• The load on the hoist motor and lifting column must not exceed the value given in the
Specification (see also product label).
• The maximum duty cycle indicated on the type identification plate must always be
observed, as damage to the product might otherwise occur. Exceeding the maximum
duty cycle can lead to a reduction in the service life of the system. Unless otherwise
specified on the type identification plate, the maximum duty cycle is 10%, or 2 minutes
of operation followed by 18 minutes at rest.
• The hoist motor and lifting column may be used only in areas appropriate to the type
of protection (IPX) installed. You will find the type of protection specified on the type
identification plate.
• Should individual parts appear to be defective, do not install them, but instead return
them to the manufacturer to be checked.
• Use the hoist only for transporting and lifting persons. Use for lifting other loads and
objects is not permitted.