Nova gear NG-305, Инструкция по эксплуатации

Страница: 13 / 24

13
REAR SUPPORT BAR
The rear support bar provides additional
stability for the mitre saw base.
1. Loosen the Phillips head screws on the
base of the mitre saw.
2. Insert the rear support bar through the 2
holes at the rear of the mitre saw.
3. Tighten the Phillips head screw to secure
the rear support bar.
WOOD CLAMP
The wood clamp is designed to keep your
work piece stable whilst cutting (Fig. 15).
Ensure your work piece is securely in place
before cutting.
OPERATION
TURNING ON AND OFF
1. To turn the Mitre Saw on, depress and
hold the on/off switch (Fig. 16).
2. To turn the Mitre Saw off, release the on/
off switch.
OPERATING THE LASER BEAM
The laser can be used as a guide when
cutting and can be adjusted to suit your
personal preference. To turn the beam on,
press the laser light on/off switch (Fig 17).
Caution: Do not use the Mitre Saw to
cut metal or masonry.
!
Fig.14
Fig.16
On/off switch
Fig.17
Laser on/off
switch
Fig.15