Section 5 - 6
www.notifierknowledge.com
997-670-000-2
Navigating the Panel Menus
Operating Manual
5.1.3 Fault Routing Outputs
Select option
3: Fault Routing Outputs
to enable/disable the fault
routing output circuit(s).
To enable/disable the fault routing output(s) press the key. Each
time the key is pressed the enable/disable state changes (toggled).
Press the key at any time to exit.
5.1.4 Delays to Outputs
This option is only available when delays have been configured as
part of one or more Cause & Effect rules. If any such delays are
configured the DELAYS ACTIVE LED is lit.
Select option
4: Delays to Outputs
to disable/enable the delay to
alarm outputs.
To disable/enable any configured delays press the
key. Each
time the key is pressed the delay enable/disable state changes
(toggled).
Press the key at any time to exit.
