Norton clipper CMR 351, Руководство по эксплуатации

Страница: 12 / 20

12
4 Transport and storing
4.1 Securing for transport
Before transporting or lifting the machine, always remove the blade and empty the water pan. Also
lock the cutting head on the rail. To do so, move the head in the middle of the rail and tighten the
knob screw until the cutting head is secured on the rail.
4.2 Transport procedure
Conform yourself to work regulations, in order to transport the machine safely. The machine is fitted
with 4 foldable handles. Fold these out of the machine to transport it easily.
The machine does not have lifting hooks
4.3 Long period of inactivity
If the machine is not going to be used for a long period, please take the following measures:
•
Completely clean the machine
•
Empty the water system
•
Take the water pump out of the slurry and clean it thoroughly.
The storage site must be clean, dry and at a constant temperature.
5 Operating the machine
5.1 Site of work
5.1.1 Sitting the machine
•
Remove from the site anything, which might hinder the working procedure!
•
Make sure the site is sufficiently well lit!
•
Observe manufacturer's conditions for connecting to power supplies!
•
Place electric cables in such a way that damage by the device is excluded!
•
Make sure you have a continual adequate view of the working area so you can intervene in the
working process at any time!
•
Keep other staff out of the area, so you can work securely.
5.1.2 Space required for operation and maintenance
Leave 2 m around the machine for usage and maintenance of the CMR 351.
5.2 Cutting material
To use the machine correctly, you must face it with one hand on one of the 3 handles of the cutting
head, and the other ready to shut the machine down in case of emergency. Always keep your hands
away from the moving blade.