Norton Clipper C914P, Руководство пользователя

Страница: 29 / 48

29
Main Causes of Belt Failures:
Premature Belt failure can be attributed to the following issues: Tension (too much
or too little), Pulley Misalignment, Damaged Pulleys, Improper Handling or
Storage, Incorrect Blade Specification for Material Being Cut, and Cutting Too
Deep.
Symptom Possible Cause Corrective Action
Belt Breakage Too Much Tension Re-tension Belts
Excessive Shock Load Reduce Load/ Check Blade
Specification
Pulley Out Of Round Replace Pulley
Burning of Belt Too Little Belt Tension Increase Belt Tension
Excessive Load
(Cutting Full Depth) For Best Performance Only
Cut only 1-/2” to 2” Per Pass
Containments On Belts Replace Belts and Find
Source Of Containments
Incorrect Blade Specification Replace Blade With One
Designed For Material Being
Cut
Belt Tearing/Ripping Pulley Misalignment Align Pulleys
Belt Rolling Off Pulley Pulley Misalignment Align Pulleys
Belt Cracking Extremely Low Temperature at
Startup Warm Machine Before Use
Exposure To Chemicals or
Lubricates Locate Source of
Containments and Replace
Belts.
Belts are a normal wear item and are not covered under
warranty.