13
05278B-2
OWNER’S MANUAL #
39202
ver.
05278B-2
PAGE # 13 English Version
1 Million Combination Security
The Excursion
®
39202 uses a digital
coding security system to prevent
unauthorized use of your telephone line
by other cordless phones nearby. The
Excursion
®
39202 has 1 million possible
security code combinations. Each
combination of the code is randomly
generated every time the handset is
picked up.
Resetting Security Code and Channel
Information
Communication between the handset
and the base unit may not be possible in
any of the following situations:
•
After a power failure.
•
After relocating the base unit by
disconnecting the AC adaptor.
•
After replacing the handset battery.
•
The handset goes out of range from
the base unit.
To reset, place the handset on the
charge cradle of the base unit for five
seconds, a beep will be heard.
Out of Range Detection
The Excursion
®
39202 is equipped with
an Out of Range detection system. If
you go too far away from the base
during a call the handset may lose link
with the base. When this happens, the
handset will beep several times every 5
seconds.
If you hear this warning signal, you
should come closer to the base unit.
TECHNICAL
INFORMATION
This cordless phone uses radio
frequencies to allow mobility. There are
certain difficulties in using radio
frequencies with a cordless telephone.
While these are normal, the following
could affect the operation of your
system.
Noise
Electric pulse noise is present in most
homes at one time or another. This noise
is most intense during electrical storms.
Certain kinds of electric equipment such
as light dimmers, fluorescent bulbs,
motors, and fans also generate noise
pulses. Because radio frequencies are
susceptible to these noise pulses, you
may occasionally hear them in your
handset. Generally they are a minor
annoyance and should not be
interpreted as a defect in your system.
Range
Because radio frequencies are used,
location of the base unit can affect
operating range. Try several locations in
your home or business and pick the one
that gives you the clearest signal.
Interference
Some electronic devices operate in
and/or generate interference near the
operating frequencies of your cordless
telephone. While several protection
circuits are used to prevent unwanted
signals, there may be periods when these
unwanted signals cause interference. If
interference occurs frequently, it can be
minimized by relocating the base unit.
You can check for interference before
selecting the final base unit location by
plugging in the phone.
Improving Cordless Reception
Follow these guidelines to improve
cordless sound quality:
•
Select an area to install the
Excursion
®
39202 where it is closest
to the center of your home or office.
This will improve the operating
range of the unit.
