background image

 

Getting Started   

Remove appliance from the box.   
Remove any packaging from the product.   
Place packaging inside the box and either store or dispose of safely.   

 

In the box   

Fire body.   
Front panel.   
Pebble pack   
Concealed fixings pack containing:   
Screws and wall plugs   
Fixing bracket   
Remote control   
Instruction manual 
 

Features   

Remote control   
Dancing flame effect   
Detachable front   
Heater with two settings   
Thermal cutout   
Two heat settings - 750W and 1500W.   
Wall mounted   

 
Safety Instructions   

When using electrical appliances, basic safety precautions should always be followed.   
Do not use the appliance until it is securely fixed as described in this manual.   
Check that the voltage indicates on the data plate corresponds with that of the local network before 

connecting the appliance to the mains power supply.   

Children should be supervised to ensure that they do not play with the appliance.   
If the supply cord is damaged, it must be replaced by a qualified engineer in order to avoid 
a hazard.   
The fireplace heater must not be positioned directly under the power socket.   
Keep furniture, curtains and other flammable material at least 1 meter away from the appliance.   
Do not leave the appliance unattended during use.   
Do not leave the appliance unattended whilst connected to the mains supply.   
Keep out of reach of children and do not allow them to operate this appliance.   
This appliance is intended for household use only and should not be used for industrial purposes.   
Do not operate this appliance after a malfunction or after being dropped or damaged in any way.   
Repairs to electrical appliances should only be performed by a qualified electrician.   
Improper repairs may place user at serious risk.   
Do not run the mains cable under carpets, rugs, etc.   
Do not allow the mains cable to hang over sharp edges or come in contact with hot surfaces.   
WARNING: In order to avoid overheating, do not cover the heater.   

Содержание EF451S








Отзывы: