Northwest 80-421S, Руководство пользователя

Страница: 5 / 13

5
Installation and Assembly
Rear View of Fireplace
Step 1. Find a safe location.
Minimum clearance on each side:
19.7” (50 cm).
Minimum clearance below:
19.7” (50 cm).
Minimum clearance above:
39.4” (100 cm).
Minimum clearance from the front
and sides: 19.7” (50 cm).
Choose a location near an outlet so
an extension cord is not required.
DO NOT position the unit directly
below a power outlet.
See Safety Information on pages
2 and 3 for warnings about safe
placement, safe installation, and
proper use of this product.
ALWAYS unplug this fireplace heater before assembly or cleaning, or before
relocating. Failure to do so could result in electric shock , fire , or personal injury .
AVOID INJURY and DAMAGE! Three screws should be screwed directly into wall
studs . If only two studs are available, two screws must be screwed directly into the
wall studs , and additional screws must also be screwed into the drywall anchors .
STEP1 ) Select a location that is not prone to moisture and is located at least 36" away from
combustible
materials such as curtain drapes, furniture, bedding, paper, etc. then use a
￠
7 drill bit to drill the
three holes A,B,C and use the Hammer to thread the Drywall anchors ( C ) into the hole till it keep flat
with the wall.
19.7”
(50 cm)
Minimum 39.4”
(100 cm)
Minimum 19.7”
(50 cm)
19.7”
(50 cm)