Northwest 80-421S, Руководство пользователя

Страница: 11 / 13

11
Pages 2 and 3 ). Make sure the outlet is in good condition and that the plug is not loose. NEVER
exceed the maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.
Methods of Operation
This electric fireplace can be operated by the CONTROL PANEL, located on the right side panel of
the fireplace (see figure below), or by the battery-powered REMOTE CONTROL.
The operation and functions of the two methods are the same.
Before operating, please review the
IMPORTANT SAFETY INFORMATION on Pages 2 and 3, and
heed all warnings.
Control Panel / Remote Control Operation
(Control panel POWER switch must be ON to use remote control.)
BUTTON FUNCTION ACTION & INDICATION
POWER
ON : Enables control panel functions and
remote control. Turns on flame effect.
OFF : Disables control panel functions and
remote control. Turns off flame effect.
1. Press once . Indicator light turns on.
Power turns on. All functions enabled.
2. Press again . Flame effect turns off.
Power and all functions turn off.
TIMER
TIMER button : Controls timer settings to
turn off fireplace at selected time.
Settings range from 0.5 hours to 7.5 hours.
1. Press once . Indicator light turns on.
Timer is set to 0.5 hours.
2. Press again until desired setting is
reached . Indicator lights show setting.
FLAME -
FLAME “-” : Makes flame effect dimmer.
NOTE: Flame effect stays on until power
button is turned off. Flame effect must be
on for heater to turn on.
1. Press once . Flame effect gets dimmer.
2. Press again until desired setting is
reached . Flame effect continues to get
dimmer each time button is pressed.