Northstar
FISH 457/467
Installation and Operation Manual
15
2-6-3 Data header
The displays can show data at the top, called the
data header.
When you select a window from the display
menu (see section 2-6) the 457/467 displays
an appropriate data header for the window.
Each favorite display (see section 2-6-2)
has its own data header. When you select a
favorite display, the 457/467 recalls the data
header for this favorite.
Setting the data header for a display
1 Press
and select Data header.
2 To turn the data header on or off:
i
Select Data.
ii Select
or
.
3 To select the size of the data:
i
Select Size.
ii Select the size to display.
4 To change the data displayed:
i
Select Data setup.
ii Change a data field:
a Press the cursor keys to highlight the
field.
b
Press
to display a menu of
data
items.
c Select a data item that is available
on your system or select None to
leave the field empty.
iii Repeat the above step to set the other
data
fields.
Tip
: If all fields in a line are None then the line
will not be displayed and the data header will
take less space on the display.
5 Press
.
Tip
: The data header will change when you
select another display. To set a data header that
you can recall later, set the header as part of a
favorites display (see below).
Favorites displays and data headers
To set a data header for a favorites display, follow
the steps to add a favorite (see section 2-6-2
- Adding a favorite display to the list). In step 1,
set the data header for the favorite as described
above.
Note:
Only the Sonar, Gauges, Fuel, Data, and
Tanks windows can have a data header.
