NorthStar 961X, Руководство по установке

Страница: 75 / 86

SECTION FOUR - Service/Maintenance
961 INSTALLATION MANUAL Revision A Page 65
Figure 33: Select database to save dialog box
>
To save only your setup and service options (user preferences),
press the
USER PREFERENCE
key.
>
To save only your waypoints and routes, press the
WAYPOINTS
AND ROUTES
key (the 961 always saves waypoints and routes
together, since routes are comprised of waypoints).
>
To save all of the above, press the
ALL
key.
The
SAVE DATA
dialog box appears, defined as either user preference
data, waypoint and route data, or all data, depending on which of the
above options you chose.
3. Insert the disk into the drive (either a floppy disk or a Zip disk), then
press the
CONFIRM
key. The
SAVING DATA
dialog box appears
(defined as either user preference data, waypoint and route data, or
all data), asking you to wait while the 961 saves the data. This dialog
box is followed by the
SUMMARY OF DATA SAVED
dialog box, show-
ing the number of files saved.
4. Press the
CONFIRM
key to return to the
DATABASE FUNCTION
screen.
Restoring a database
To restore a previously saved database to the 961 (note that after you
restore a database, you must restart the 961 for the system to “accept” the
restored database):
1. Press the
STAR
key until you reach the
SERVICE MENU
screen, then
press the
DATABASES AND LOGS
key.
2. At the
DATABASE FUNCTION
screen, press the
RESTORE DATA-
BASES
key. This key only appears after you’ve saved a database to
the 961 (a database that hasn’t been saved can’t be restored). The
SELECT DATABASE TO RESTORE
dialog box appears.