NorthStar 6000i, Быстрый старт и справочное руководство

Страница: 78 / 184

74
Reference section 4 — Creating waypoints and routes
Creating routes from a list of waypoints
Northstar 6000i
Creating routes from a list of waypoints
To create a route from a list of existing
waypoints:
1. Press
WAYPTS/ROUTES
, then press
Routes
.
2. Press
New
to display the
NEW ROUTE
screen.
3. Enter the name of the route using the key-
pad and cursor pad.
4. If the Use list menu key is displayed,
press it to change from chart-based edit-
ing to list-based editing.
5. Press ENTER .
6. Press
Insert
.
The SELECT WAYPT screen appears, list-
ing all of your stored waypoints.
7. If you want to switch between the
LOCAL
and
ALPHA
lists, press
Next view
.
8. Move the cursor to select the desired way-
point, then press
ENTER
to place the
waypoint in your route. Or, press
New
to
create a new waypoint, then add it to the
route.
9. Repeat Steps 7 and 8 until your new route
is complete.
To see or edit the route on the CHART
screen at any time, press
Chart.
Press
Return
to go back to the NEW ROUTE
entry screen.
Saving a route as you travel
To make a record of a trip that you may
want to repeat later, you can save
waypoints into a route as you travel by
pressing the
SAVE/MOB
key every time
you pass a point you want to store in the
route.
The save-route function makes this a very
simple process: First, you tell the
6000i
that you want to save a route as you travel,
then you press
SAVE/MOB
as you pass
each new waypoint, then you tell it to stop
saving the route when you reach the end
of the route.
To begin saving a route as you travel:
1. Press WAYPTS/ROUTES , and then press
Routes
to display the
ROUTES
screen: