NorthStar 6000i, Быстрый старт и справочное руководство

Страница: 31 / 184

27
Reference section 1 — Using the Chart Screen
Using the cursor on the chart screen Reference Manual Revision D
Using the cursor on the chart screen
Press the cursor pad to display the
red cursor symbol on the
CHART
screen. Continue pressing the
cursor pad to move the cursor across the
screen.
If you have trouble fi nding the cursor in a
busy part of the CHART screen, just look
at the edges of the screen for the red cur-
sor pointers: They line up with the cursor.
When you press the cursor pad, the 6000i
switches to browse mode , described on
page 28.
If you move the cursor onto a
waypoint or navaid, that point is
selected , as indicated by a
diamond-shaped box around the
point. Information about the selected point
appears in the info bar at the bottom of the
screen.
After pressing the cursor pad to move the
cursor to a point on the chart, you can
press
Go to cursor
and
ENTER
to start
navigating to the designated cursor
location.
If you placed the cursor on a waypoint or
nav aid, this menu key would read
Go to
waypt
or
Go to nav aid
.
You can use the cursor to:
•
select a nav aid or waypoint, to:
>
show its name, lat/lon, and distance
and bearing
>
navigate to it
>
add it to a route
•
designate a point on the chart, to:
>
show its lat/lon
>
navigate to it
>
add it to a route
>
store as a waypoint
•
select a leg of a route to follow or edit
•
view a new area of the chart by moving
the cursor to the edge of the screen
Selecting a navaid with the cursor