NorthStar 1201, Руководство пользователя

Страница: 12 / 52

Page 8 — Using the Setup Menu 1200 Series Display, Rev. A2
Using the Setup Menu
The Setup Menu is used to configure the display. The 1201 and
1202 have different Setup Menus. Follow the steps below for
your specific model.
The Setup Menu will disappear by itself after a certain amount of
time. This time can be set in both the 1201 and the 1202.
The 1201 uses a line-based Setup Menu. When making
adjustments, simply press
to activate the menu.
Use the up and down arrows on to select the param-
eter you wish to modify and press and to adjust the
value. When you have finished making changes, press and hold
once again to exit the Setup Menu.
The 1202 uses an icon-based Setup Menu. To activate
it, press
once. The menu appears as two rows of
icons. One of these icons is highlighted. This high-
lighted icon represents the set of parameters to be modified. To
advance to the next icon, press
.
Once at the desired icon, use the up and down arrows on to
select the parameter you wish to modify. Then use
and
to change the value or setting of that item. To exit the
menu, press and hold until the menu disappears.
NOTE:
Always make note of a setup value be-
fore changing it. Then if you don’t like
the change, you can restore the previous
setting.
Please read Setup Menu details carefully as it
is possible to misadjust the display and ad-
versely affect display quality.
!
1201
MENU
DATA VIDEO
MENU
1202
MENU
MENU
DATA
VIDEO
MENU