Assembly
6
FIG03026
Engine
(not included)
Pump Cover
Pump Sealing Washer
Pump Mount Bolt
Mechanical Seal
Impeller
FIG03027a
FIG03027
Impeller
Shaft
washer
Shaft bolt
Refer to “Specifications” section of this manual for engine requirements for your specific pump.
Step 1: Attach pump cover to engine.
Using the four (4) supplied pump mount bolts and four (4) supplied pump sealing washers, fasten
the pump cover to the engine. Ensure the mechanical seal is securely installed in the pump
cover.
Step 2: Attach Impeller to engine shaft.
Item #’s 109273, 109274, 109283, 109284,
109293, 109294
Screw impeller clockwise until hand tight
onto engine shaft.
Item #’s 109271, 109281, 109291
Ensuring the key inside the impeller is aligned
with the engine keyway, use the shaft washer
and shaft bolt to attach the impeller to the
engine shaft.