DVRN960 User
’s Manual
55
5.2.2
Install the Remote Monitoring Software
With the IP address of the DVR, the next step is to install the remote
monitoring software via connecting to the DVR. Follow the steps below.
Enter the IP address of the DVR in the address bar of the web browser.
The IP address of the DVR can be saved as a Favorites item in the web
browser to enable easy access in the future.
The ActiveX controls and plug-ins dialog will show twice for confirmation.
Click <Yes> to accept the installation of ActiveX plug-ins. The remote
monitoring software plug-ins will be downloaded and installed on the PC
automatically.
NOTE:
Do not enter any leading
“0” characters in the address, for
example,
“192.068.080.006” should be entered as “192.68.80.6”. If
the default trigger port 80 is changed into another one, take port 81
for example, the IP address should be entered as
“192.68.80.6:81”.
A version check starts to verify whether the remote monitoring software
was installed already, and also check if the version is the same as what is
stored in the connecting DVR. This process may take up to 30 seconds.
When the software is completely downloaded and installed, the Login
Screen is now displayed.
Содержание DVRN960 Series
Страница 2: ...DVRN960 User s Manual 1 ...