Northern DVRN960 Series, Руководство пользователя

Страница: 59 / 74

DVRN960 User
’s Manual
58
5.3.1.1 Select Display Mode
Choose the number of windows to be displayed on the main window. Click
one of the display buttons in MODE section. Available selections are 4, 9 and
16 camera displays. To view certain window in full-screen, either double-click
on the wanted window, or click on the corresponding CAMERA button.
5.3.1.2 Operate Cameras with Dome Control
The remote monitoring software allows users to control and configure a dome
camera remotely.
Click on any CAMERA button displayed with a dome icon to view the camera
in full-screen. The PTZ Control Panel will be displayed on the main window.
The items on the PTZ Control Panel are described as follows.
Auto Focus (A.F.)
Click on it and the focus of the camera will be automatically adjusted to show
a clearer image.
Set/Go Preset (
•) & Run Tour (•

)
The remote monitoring software allows its user to set up to 255 preset
positions according to the allowance of the supported dome cameras.
Use Direction buttons to move dome camera to an appropriate position. Then,
click the button, select <Set Preset>, and choose a wanted number from the
pull-down list. The preset position is named as the selected number.
Click this button, select <Go Preset> and choose a preferred number from
the pull-down list to call the preset point for viewing.
Click this button, select <Run Tour> and the dome camera will start the tour
set previously at the dome camera side.
Dome ID (ID)
Click for changing the dome ID and protocol. Proper authority is required to
access this function.
Focus +/
−
Use these buttons to adjust the camera lens to focus on objects for a clear
view. Click on <Focus +> to focus near or <Focus
−> to focus far.