iv Table of Contents
Practice 450-1011-201
Installing the Analog Line Cards
50
Removing an SRU from a Cabinet
52
Restarting the System after the Removal of an SRU 53
7. Installing the Cross-connect Panel
55
About the Cross-connect Panel
55
Before Making Cross-connections
55
Unpacking the Office Cross-connect Panel 59
How to Install the Office Cross-connect Panel
59
8. Connecting/Disconnecting the Cables at the
Cabinets
63
Cabling for a SCSI Cluster
66
Cabling for Systems Using SASI Connections
69
SASI Cabling (Primary Processor to 80 Megabyte Storage SRU)
69
SASI Cabling for the 350 Megabyte Mass Storage SRU
72
Direct RS-232-C Connections
73
LANlink Connections to the Cross-connect Panel
75
Digital Trunk Link Connections to the Cross-connect Panel
78
Analog Link Connections to the Cross-connect Panel
82
9. Cross-connections to Distribution Frames and
Building
87
How to Use the QTBIX16A Connection Tool
89
How to Terminate Building Wiring at the Cross-connect Panel
91
10. Connecting the Meridian M4000 Terminals
93
Connecting the Headset Accoustic Limiter
96
11. Connecting the LAN Interface Units to the
System
99
Installing the LAN Interface Unit
100
Connecting an LIU to the System
102
Removing an LIU from Service
102
12. Connecting Peripherals, Hosts, and Modems to
the LIU
103
Connecting a Modem to an LIU
104
Connecting an ASCII Terminal to an LIU
104
Connecting a Serial Printer to an LIU
106
Connecting a Host Computer to an LIU
106
Connecting a Nine-track Magnetic Tape Unit to an LIU (SASI Version)
107
13. Using the Cartridge Tape Drive
113
Cleaning the Tape Heads
114
Inserting the Tape Cartridge into the Mass Storage or Cartridge Tape SRU
116
