42 / Answering calls
Compact ICS 4.0 System Coordinator Guide
P0881596 Issue 02
You can re-establish the conference.
1. Press
ƒ‹.
2. Take the held call off hold. This is not necessary for the
M7100 telephone.
Removing yourself from a conference
ƒ‡‚
You can remove yourself from a conference, and connect the
other two callers through your Norstar system.
Enter the Transfer feature code
ƒ‡‚.
When you remove yourself from a conference using the
Transfer feature, and both callers are from outside your
system, one of the callers must have called you on a disconnect
supervised line, or the call is disconnected.
Displays
You are trying to add a fourth party to your
conference call, or to join two conferences
together. Release one call from the
conference before adding another, or keep
the two conferences separate.
You have put a conference call on hold.
You have tried to make a conference call, but
your system is already handling its maximum
of four conference calls.
You are on a conference with the two lines or
telephones shown. You can drop out of the
conference and leave the other two parties
connected (Unsupervised Conference) by
pressing
TRANSFER
or entering the Transfer
feature code.
3 parties only
Conf. on hold
Conference busy
Line001 21
TRANSFER
p0881596.book Page 42 Wednesday, November 18, 1998 4:50 PM
