Northern Telecom Compact ICS 4.0 Скачать руководство пользователя страница 143

Страница: 143 / 254

Customizing your telephone / 131

P0881596 Issue 02

Compact ICS 4.0 System Coordinator Guide

Applying button cap labels

Before you apply button labels, activate the Button Inquiry feature
(

ƒ•‚

)

to verify the button functions and to avoid

activating features as you put the labels onto the buttons.

Keep the extra labels and button caps with each Norstar telephone
or leave them with the system coordinator.

Types of button caps

•

Unlabeled, clear button caps
with appropriate green or gray paper for typing in line numbers,
telephone numbers, and features

•

Pre-printed, colored button caps
in green or gray

Some examples of pre-printed button caps

Identifying the telephones

Write the individual telephone numbers on the labels and attach
them to the appropriate Norstar telephones.

Write the telephone number and the internal number on the
appropriate receiver card for each type and color of telephone
that is to be installed.

Cover the receiver card underneath the receiver of each
telephone with the plastic lens.

Green caps

Grey caps

∫

Line 1

Tip -

To make identification of line types easier,

use preprinted green button caps for lines that
support incoming and outgoing calls. Use clear
button caps for target lines that are incoming only.

p0881596.book Page 131 Wednesday, November 18, 1998 4:50 PM

Содержание Compact ICS 4.0































































































































































































































































Результаты поиска

Содержание Compact ICS 4.0

Отзывы:

Northern Telecom Compact ICS 4.0, Руководство пользователя, Страница: 143 / 254

Результаты поиска

Содержание Compact ICS 4.0

Отзывы: