200 / Using System features
Compact ICS 4.0 System Coordinator Guide
P0881596 Issue 02
The Wait for Dial Tone symbol (
‡
) uses two of the 24 spaces
in an autodial or speed dial sequence.
Displays
Using pulse dialing for a call
If your external telephone lines use pulse dialing, you can
temporarily switch to tone dialing by pressing
£ after
selecting the line. Tone dialing allows your Norstar telephone
to communicate with devices and services that respond to tone
signals, such as automatic switchboards, and fax or answering
machines.
Using your Norstar system from an external location
You can use the lines and some of the features of a Norstar
system from outside the system. You can do this over the
public telephone network when you are away from the office,
or you can call from another system, over a private network.
An example of how remote access works is a sales
representative who spends a lot of time out of the office needs
to make long distance calls to the European office. Your
Norstar system has a leased line to Europe with reduced
transatlantic charges. You provide that sales representative
with a Class of Service password that gives access to the
transatlantic line. The sales representative can then telephone
into the Norstar system from a hotel, enter their Class of
Service password, and use the leased transatlantic line to make
calls.
Remote users can access Norstar lines, line pools, the page
feature, and remote administration (if enabled through
You have entered a code that can only be
used in a programmed autodial or speed dial
sequence, not on a call you dial directly.
Programmed Release and Run/Stop are for
use in programmed dialing sequences only.
Invalid code
p0881596.book Page 200 Wednesday, November 18, 1998 4:50 PM
