Northern Telecom Compact ICS 4.0 Скачать руководство пользователя страница 225

Страница: 225 / 254

Troubleshooting / 213

P0881596 Issue 02

Compact ICS 4.0 System Coordinator Guide

Testing the telephone buttons

1. Press

ƒ°‚fi, then £ or

2. Press

TEST

˙ to go ahead with a button test.

3. Press button to see its function. If the button you pressed

uses an indicator, it should turn on when you test the
button.

4. Pressing the

® button puts

Rls button

on the display

briefly and returns you to the

Button test

display.

Testing the speaker in the telephone handset

The handset test is not available if you have a headset plugged
into the telephone.

1. Press

ƒ°‚fi, then £ or

twice. The

display reads

Handset test

2. Press

TEST

˙ to go ahead with a handset test.

3. Pick up the handset and listen. You should hear dial tone

through the handset at a maximum volume. The volume is
reset to maximum only while the test is going on.

Pressing any button or hanging up ends the test.

Testing the telephone headset

The headset test is not available to telephones that do not have
a headset jack or a headset plugged in.

1. Press

ƒ°‚fi, then £ or

until the

display reads

Headset test

2. Press

TEST

˙ to go ahead with a headset test.

You should hear dial tone through the headset. The volume is
reset to a default level during the test.

Pressing any button ends the test.

p0881596.book Page 213 Wednesday, November 18, 1998 4:50 PM

Содержание Compact ICS 4.0































































































































































































































































Результаты поиска

Содержание Compact ICS 4.0

Отзывы:

Похожие инструкции для Compact ICS 4.0

Бренды по названию

Популярные бренды

Northern Telecom Compact ICS 4.0, Руководство пользователя

Результаты поиска

Содержание Compact ICS 4.0

Отзывы:

Похожие инструкции для Compact ICS 4.0

Бренды по названию

Популярные бренды