Northern Lights OWN-ADV, Инструкция по установке и эксплуатации

Страница: 5 / 91

OWN-ADV 01/12
1. WAVENET CONTROLLER SERIES
3
WaveNet Front View
WaveNet Back View
The WaveNet is designed for use on generator sets
with mechanical engines. It can monitor analog
data from senders on the engine and generator
such as oil pressure, coolant temperature, current,
voltage, engine speed and generator frequency.
An RS232 interface is provided that allows
communication with the Northern Lights
WaveNet PC Interface to change settings or
display information on the PC. An RS485 port
is provided for Modbus communications (slave
only) for remote annunciation or communications.
In addition to the monitoring features, the
WaveNet controller can be used to provide
protective warnings or shutdowns.
This manual is divided into three sections:
1. Hardware installation
2. Operation / Con fi guration
3. Advanced Con fi guration
Receiving:
Every effort is made to ensure that your WaveNet gen-set controller arrives at its destination
undamaged and ready for installation. The packaging is designed to protect the WaveNet internal
components as well as the enclosure. Care should be taken to protect the equipment from impact at
all times. Do not remove the protective packaging until the equipment is at the installation site and
ready to be installed.
When the WaveNet reaches its destination, the customer should inspect the shipping box and controller for
any signs of damage that may have occurred during transportation. Any damage should be reported
to a Northern Lights representative after a thorough inspection has been completed.
1.1 THIS MANUAL
2. RECEIVING, HANDLING & STORAGE