58
OM-C3 11/21
Service and Maintenance - As Required
Replacing Air Cleaner Filter Element
Replace element if it is torn, or visibly dirty.
NOTE: This procedure applies to Northern Lights air
cleaner kits. Refer to manufacturers’ instructions for
servicing air cleaners not supplied by Northern Lights.
1. Loosen clamp (A) and remove filter element.
IMPORTANT:
Replace filter element after 10 cleanings.
(See page 57 for replacement instructions)
2. Tap end of filter GENTLY on hard surface to dislodge
loose dirt.
3. Brush dirt side of filter GENTLY with soft bristle
brush.
IMPORTANT:
DO NOT clean element with gasoline,
solvents, parts cleaners, strong detergents, or caustic
cleaning solutions. DO NOT steam clean or use high-
pressure washers to clean element. These processes will
damage filter media and/or rubber base or end cap.
4. Spray air filter cleaner (B) liberally onto entire element.
Let soak into filter media for 10 minutes.
Air cleaner restriction indicator
Removal of air filter element (A)
Spray filter with cleaner (B)
