Northern Lights Lugger ONL753W2, Руководство оператора

Страница: 20 / 27

ONL753W2 10/09
20
Troubleshooting
If you cannot correct problems with these procedures, see your Northern Lights dealer.
DC ELECTRICAL SYSTEM
PROBLEM POSSIBLE CAUSE RECOMMENDATION(S)
Battery Will Not Charge
Loose or corroded connections • Clean and tighten battery connections.
Sulfated or worn out batteries • Check specifi c gravity of each battery.
• Check electrolyte level of each battery.
Loose or defective alternator belt • Adjust belt tension.
• Replace belt.
Starter Inoperative
Check DC circuit breaker • If the breaker is tripped, reset it.
Loose or corroded connections • Clean and tighten loose battery and
harness plug connection.
Low battery output • Check specifi c gravity of each battery.
• Check electrolyte level of each battery.
Defective electrical system • Repair or replace.
ground wire:
Starter Cranks Slowly
Low battery output • Battery is too small.
• Battery cables are too small.
Check specifi c gravity • Replace battery if necessary.
of each battery
Check electrolyte level • If low, fi ll cells with distilled water.
of each battery
Crankcase oil too heavy • Fill with oil of appropriate viscosity.
Loose or corroded connections • Clean and tighten loose connections.
Entire Electrical System
Check DC circuit breaker • If breaker is tripped, reset it.
Does Not Function
Faulty connection • Clean and tighten battery and harness
plug connections.
Sulfated or worn out batteries • Check specifi c gravity and electrolyte
level of each battery.