Northern Lights Lugger ONL753W2, Руководство оператора

Страница: 10 / 27

ONL753W2 10/09
10
SERVICE
50 250 500 1000 2500
POINT
PAGE OPERATION DAILY Hours Hours Hours Hours Hours
ENGINE:
SP1 8 & 12 Check oil level
•
SP2 12 Change engine oil 1) 5)
• •
SP3 12 Change lube oil fi lters 1) 5)
• •
SP4 13 Check air cleaner 1) 4)
•
SP5 13 Check V-belt tension
•
SP6 13 Check valve clearances 1) 2)
•
FUEL SYSTEM:
SYSTEM: SYSTEM:
SP7 14 Check primary fi lter (Racor) 2) 3)
•
SP8 14 Change primary fi lter element (Racor) 2) 3)
•
SP9 14 Change secondary fuel fi lter 1) 3)
•
SP10 15 Bleed the fuel system 3)
SP11 17 Check injectors 1) 3) 6) 7)
•
SP12 17 Check fuel injection pump
•
COOLING SYSTEM:
SP13 8 & 17 Check coolant level
•
SP14 18 Check and fl ush cooling system
•
SP16 18 Check and clean radiator fi ns
•
ELECTRICAL SYSTEM:
SP18 19 Check electrolyte level in batteries
•
SP19 19 Check condition of batteries with hydrometer 1) 4)
•
OUT OF SERVICE:
SP20 19 Winterizing or out-of-service 3)
The Servicing Schedule Chart below shows the service schedule required for proper maintenance of your generator
set. More detailed coverage of each Service Point (SP) is listed on the page noted in the ‘page’ column.
DAILY:
SP1
Check oil level in engine
SP5 Check V-belt tension
SP7
Check primary fuel fi lter
SP13 Check coolant level
SP18 Check electrolyte in batteries
AFTER FIRST 50 HOURS:
SP2/3
Change engine oil and fi lter
SP6 Adjust valves
AFTER FIRST 100 HOURS:
SP2/3 Change engine oil and fi lter
EVERY 250 HOURS:
SP2/3
Change engine oil and fi lter
SP4 Check air cleaner
SP16
Check and clean radiator
SP19 Check state of charge of batteries
EVERY 500 HOURS:
SP8 Change primary fuel fi lter element
SP9
Change secondary fuel fi lter
EVERY 1000 HOURS:
SP4
Change air cleaner element
SP6 Check valve clearances
SP11
Check injectors
EVERY 2500 HOURS:
SP12
Check fuel injection pump
SP14 Check and fl ush cooling system
1) Perform all maintenance once a year even if hour level has not been reached.
2) Consult manufacturer's maintenance schedule, note on chart.
3) Whenever necessary.
4) More often if necessary.
5) After fi rst 50 hours, then after fi rst 100 hours, then every 250 hours.
6) Clean injection nozzles every 1500 hours.
7)
For EPA emission standards fuel nozzle needs to be
cleaned every 1500 hours, the fuel nozzle and fuel pump
need to be cleaned, adjusted, or repaired every 3000
hours, and the quality guarantee for these parts is 1500
hours or 2 years.
Servicing Schedule Chart