Northern Lights and NL1066H3, Руководство оператора

Страница: 18 / 41

ONL2-2 7/13
16
The Servicing Schedule Chart below shows the service schedule required for proper maintenance of your marine engine
or generator set. More detailed coverage of each Service Point (SP) is listed on the page noted in the ‘page’ column.
DAILY:
SP1 Check oil level in engine
SP8
Check primary fuel fi lter
SP15
Check cooling water level
AFTER FIRST 50 HOURS:
SP2
Change engine oil
SP3 Change lube oil fi lter
EVERY 50 HOURS:
SP21
Check electrolyte in batteries
AFTER FIRST 100 HOURS/ EVERY TWO WEEKS
5
:
SP2 Change engine oil after fi rst 100 hrs., then check every 2 wks.
SP3
Change oil fi lter after fi rst 100 hrs., then check every 2 wks.
SP4
Check air cleaner valve & restriction indicator gauge
6
SP7
Check crankshaft vibration damper
7
SP15
Check coolant level
EVERY 250 HOURS
SP2&3
Change engine oil & fi lters (fuel fi lter/water bowl)
EVERY 500 HOURS / YEARLY:
SP4
Replace air cleaner
SP5
Check V-belt condition
SP9 Change primary fi lter element (Racor)
SP10
Change secondary fuel fi lter
SP11 Check injectors
SP14 Check turbocharger boost pressure
SP16
Check cooling system
SP22 Check the state of the charge of the batteries
SP25
Check engine mounts
SP26 Clean crankcase vent tube
SP27 Check air intake hoses
SP29
Check electrical ground connection
SP30 Check engine speeds
EVERY 2000 HOURS:
SP6
Check & adjust valve clearance
SP7
Check crankshaft vibration damper
SP12 Check fuel injection pump
SP16
Flush cooling system
SP18 Check and clean radiator
SP23
Test thermostats
SP31
Adjust variable speed (droop) (Mechanical Engines Only)
1) Change the oil and fi lter before the fi rst 100 hours of operation during engine
break-in.
2) Perform all maintenance once a year even if hour level has not been reached.
3) Consult manufacturer's maintenance schedule, note on chart.
4) Whenever necessary.
Service Schedule Chart
SERVICE
50 100 250 500 2000
POINT
PAGE OPERATION DAILY Hours Hours Hours Hours Hours
ENGINE:
SP1 13 Check oil level
•
SP2 13 Change engine oil 1) 2)
• •

•
SP3 13 Change lube oil fi lters 1) 2)
• •

•
SP4 13 Check air cleaner valve & change element 2) 4) 6)
•
 
•
SP5 Check belt condition 2)
  
•
SP6 15 Check valve clearances 2)
 
•
SP7 17 Check crankshaft vibration damper 7)
 
•
SP25 Check engine mounts

•

SP27 Check air intake hoses

•
SP30 Check engine speeds

•
FUEL SYSTEM:
SP8 16 Check primary fi lter (Racor) 3)
•
SP9 16 Change primary fi lter element (Racor) 3) 4)
 
•
SP10 17 Change secondary fuel fi lter 2) 4)

•
SP11 Check injectors 8)
 
SP12 Check fuel injection pump

•
TURBOCHARGER:
SP13 22 Check air, oil & cooling water lines for leakage 2)
•
SP14 22 Check boost pressure
   
•
COOLING SYSTEM:
SP15 24 Check cooling water level
•
SP16 24 Check and fl ush cooling system 2)

•

•
SP18 Check and clean radiator
•

ELECTRICAL SYSTEM:
SP21 26 Check electrolyte level in batteries 2) 4)
•
SP22 26 Check condition of batteries with hydrometer 2)

•

SP23 Test thermostats
  
•

SP29 Check electrical ground connection
 
•
5) Operate engine at rated speed with 50-70% load for 30 minutes at
least.
6) Replace air cleaner element when restriction indicator shows
vacuum of 625 mm (25 in.) H
2
0.
7) Replace damper every 4500 hours or after 60 months.
8) Check at 5000 hours.