North-Vision Tech Deluxe-100 Скачать руководство пользователя страница 16

Страница: 16 / 66

User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc.

8 -

3.2 Installation

3.2.1 Opening the Box and Check

1. Open the packaging, take out the monitor accessories from the box carefully and place it in a safe stable

and easy to watch position.

2. Open the users’ manual to sort the accessories according to the packing list.

Inspect the accessories for any mechanical damages

Check all the exposed leads and inserted accessories

Please contact the local dealer or our company in case of any problems. We are to offer you the best

solution for your satisfaction.

3.2.2 Connecting the AC Power Cable

Connecting procedures:

Make sure that the AC power supply is 100-240Vac, 50/60Hz.

Use the power cable prepared by the manufacturer. Insert one end of it to the power port of the

monitor and the other end to the grounded three-phase power jack.

Connect the monitor to the grounding port with the provided ground cable.

Caution: ensure that the monitor is grounded correctly.

The provided battery of the monitor must be recharged after transportation or storage. So if

the monitor is switch on without being connected to the AC power socket, it may not work

properly due to insufficient power supply.

3.2.3 Starting the Monitor

The system performs self-detection and enters initial display after switch on the monitor, and the orange

alarm indicator blinks to inform that the user can begin operating it.

Check all the applicable functions to make sure that the monitor works normally.

If the built-in battery is applied please recharge it after using the monitor to ensure sufficient power

storage.

Do not use the monitor to monitor the patient if there are indications of damage or reminders

of error. Please contact the local dealer or our company.

Start the monitor again 30 seconds later after it is switched off.

Содержание Deluxe-100



































































Результаты поиска

Содержание Deluxe-100

Отзывы:

Бренды по названию

Популярные бренды

North-Vision Tech Deluxe-100, Руководство пользователя

Результаты поиска

Содержание Deluxe-100

Отзывы:

Бренды по названию

Популярные бренды