North Light JY-0004A-20W-PIR, Руководство пользователя

Страница: 5 / 28

5
EN
G
LIS
H
Solar cell
Ceiling/Wall mounting
1. Use the solar cell’s 4 screw holes to mark the mounting
location onto the wall.
2. Drill appropriately sized holes into the wall and fasten
the solar cell using appropriate screws and wall plugs.
3. Connect the solar cell’s power cable to the wall light’s
input socket (4).
Mounting onto pipe/scaffolding, etc.
1. Thread the supplied L-screw through
the bracket.
2. Pass the pipe/scaffolding between
bracket and L-screw and tighten it into
place using the wing nut.
Operating instructions
• The wall light has an integrated 3 × 1500 mAh NiMH rechargeable battery pack.
• Set the [ OFF-ON-PIR ] selector to
OFF and allow the battery pack to charge for
two days before using the light for the first time.
Lighting and sensor light sensitivity level
Lighting [ DURATION ]
• The light duration time can be set from 5 to 40 seconds.
• Lighting duration can be adjusted by turning the [ DURATION ] screw. Turn in
the screw in direction of the arrow to increase the lighting time. Note: Each newly
detected movement restarts the light timer from the beginning again.