Nortel Symposium TAPI Service Provider for Succession 3.0, Руководство пользователя, Страница: 43 / 198

Chapter 2 Installation guidelines 43
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
Assigning an IP address for the Succession switch
To assign an IP address for an Ethernet port, log on to the Succession switch
through Optivity Telephony Manager (OTM). Use the following sample as a
template, substituting relevant values where appropriate in overlay 117:
> LD 117
NEW HOST M1SERVER_A 47.1.1.10
where
M1SERVER
_A is the host name for the IP address
and
47.1.1.10
is the IP address of the active Ethernet port
CHG ELNK ACTIVE M1SERVER_A
CHG MASK 255.255.255.0
where
255.255.255.0
is the local subnet mask
In a redundant system, with a dual CPU, repeat this process for the backup,
inactive CPU, using the following template and substituting appropriate values
where necessary:
> LD 117
NEW HOST M1SERVER_B 47.1.1.11
where
M1SERVER _B
is the host name for the IP address
and
47.1.1.11
is the IP address of the standby Ethernet port
CHG ELNK INACTIVE M1SERVER_B
After you assign the necessary IP address(es), press the <MAN INT> button on
the CPU card to manually initialize the system and activate the new IP address
information.
Defining a routing table
The routing table supplies the Succession switch with the IP addresses of a
gateway server. This information allows the switch to send return messages to the
gateway for forwarding to the requesting client. If you have a default gateway in
the network, use the following sample as a template, substituting relevant values
where appropriate:
> LD 117