Nortel Symposium TAPI Service Provider for Succession 3.0, Руководство пользователя, Страница: 173 / 198

Chapter 8 Troubleshooting 173
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
The middle pane lists the hexadecimal addresses where these lines are stored in
TAPI server memory. The right-hand pane displays the number of lines that were
initialized successfully.
Verifying that telephone sets are configured correctly
To verify that a telephone set is configured correctly:
1 In the Symposium TAPI SP configuration application, select “Succession
Host tab -> TN table” to display a list of the TNs that are configured for
Symposium TAPI SP. Identify the telephone set associated with line 0.
2
In the TAPI browser application, click the Param check box on the toolbar.
Click the Line+ button on the toolbar to display the lineOpen window.
(Figure 60)
Figure 60 LineOpen window
3
Select dwDeviceID in the left-hand pane.
4
Click OK to return to main configuration window.
5
Select line 0 in the middle pane of the main TAPI browser window.
6 Perform an action with the telephone set associated with line 0. For example,
take the receiver off hook or make a manual call to the device.