Nortel SR1001 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 82

Nortel SR1001 Скачать руководство пользователя страница 34

22

CHAPTER 3

Installation

Network Connections

SR1001 Installation Guide

Version 8.3.5

Network Connections

The following sections describe how to connect various network cables to the SR1001.

Connecting the Ethernet Cable

The front panel on the router accommodates one LAN connections. Use a category 5,
twisted-pair Ethernet cable with RJ-45 connectors to connect to the LAN. Refer to Figure 6 on
page 14 to identify this cable.

Follow this procedure to connect the SR1001 to an Ethernet LAN network.

1

Connect the RJ-45 connector of a category 5 rated Ethernet cable to either the Ethernet 0
or Ethernet 1 port on the back panel.

2

Connect the RJ-45 connector on the other end of the cable to the LAN port.

Make sure that the cable connectors are locked and secure in the ports. See Table 25 on page
59 for pinout information about this cable.

Figure 15 Connecting the Ethernet Cable

Connecting the WAN Cable

The back panel accommodates up to two WAN (model specific) cables. Use 26 AWG (minimum)
category 5, twisted-pair cable with RJ-48C connectors for this interface. Refer to Figure 7 on
page 15 to identify this cable.

CAUTION:

To reduce the risk of fire, use only number 26 AWG or larger UL Listed or CSA Certified

Telecommunication Line Cord for all network connections.

Follow this procedure to connect the WAN port to the network:

1

Insert the RJ-48C connectors on one end of one cable in the appropriate port on the
Service Provider’s demarcation point.

2

Insert the RJ-48C connectors on the other ends of the cables in the WAN port on the front
panel of the Nortel router.

Make sure that the cable connectors are locked and secure in the ports. See Table 26 on page
59 for pinout information about this cable.

%$&.83

Ethernet LAN Port

Fast Ethernet Port 0

Fast Ethernet Port 1

«
...
32
33
34
35
36
...
»

Содержание SR1001



















































































Отзывы:

Нет отзывов