Nortel Passport 8672ATME, Инструкция по использованию

Страница: 85 / 162

Chapter 5 Managing the Passport 8672ATME Module with the CLI 85
Using the Passport 8672ATME Module
Show commands
This section discusses the CLI show commands available with the
Passport 8672ATME Module. These commands allow you to view information
about the module:
show ports info atm all [< ports >]
show ports info atm fdb
show ports info atm ports [< ports >]
show ports info atm pvc [< ports >]
show ports info atm 1483 [<
ports
>]
show ports stats atmport [< ports >]
show ports stats atm felinecurrent [< ports >]
show ports stats atm felineinterval < intervalid > [< ports >]
show ports stats atm fepathcurrent [< ports >]
show ports stats atm fepathinterval < intervalid > [< ports >]
show ports stats atm linecurrent [< ports >]
show ports stats atm lineinterval < intervalid > [< ports >]
show ports stats atm pathcurrent [< ports >]
show ports stats atm pathinterval < intervalid > [< ports >]
show ports stats atm sectioncurrent [< ports >]
show ports stats atm sectioninterval < intervalid > [< ports >]
show ports stats atm sonetmediumtbl [< ports >]
Refer to Reference for the Passport 8000 Series Command Line Interface
Switching Operations, and Reference for the Passport 8000 Series Command Line
Interface Routing Operations for a complete list of CLI show commands.
show ports info atm all command
This command displays information (Figure 31) about the configuration for the
specified port or for all ports. The command uses the syntax:
show ports info atm all [< ports >]